Turborix/HobbyKing/Flysky Calibration



The Calibration dialog is shown above. Initially only the 'Start Calibration' and 'Exit' buttons are enabled. If you click the 'Start Calibration' button you will be lead through the three steps of the process (and the LED on the transmitter should start flashing). The three steps require you to identify the end points of the 6 channels by:

  1. moving the 4 trims and 2 joysticks to their extreme Right and Up positions, like this:
  2. moving the 4 trims and 2 joysticks to their extreme Left and Down positions, like this:
  3. turning the 2 VR knobs fully anti-clockwise and then fully clock-wise

Once you have completed the three steps you can exit the calibration procedure and return to the main Configuration screen.

Back to main Configurator page